Wednesday, 31 December 2014

Shooting Schedule (Created By Stefano Towell)

Shooting Schedule (Created By Stefano Towell)

For our music video me and the rest of my group have to come up with a schedule before hand to keep up with deadlines and to make everything easier when organising. We plan on starting filming the performance part of the video on the week begging the 17th November as we believe that this stage is an important one to do first due to it being the base of the video as we will show us playing the instruments on the choruses of the songs we include as well as clips during the verses. We have all decided what we will be wearing as well as the lighting which can be seen in our other Pre-Production blogs. It will be filmed in the drama studio of our school.

The performance stage of filming should take no longer than a week as we have already learnt our lines as well as being able to keep in time with the song on the instruments we will be playing including guitars and drums. The next stage will be the start of the song that will be filmed in the Kings Langley woods as the lighting within it will be very beneficial and will give a good effect to the video. This part of filming should commence the week following on the 24th November. We plan to finish filming as well as the lions share of the editing by Christmas as we do not have much time after to complete it as well the blogs to go with it. It is a tight deadline however with a fixed schedule, it should make the process easier as well as smoothly run which is something needed for this production if we want an impressive outcome.

Equipment List (Created By Stefano Towell)

Equipment List (Created By Stefano Towell)

As part of our Pre-Production, me and my group have to write up 10 blogs that explain our forgoing production that will take place including where it will be shot, equipment, shot lists and more. For this post I will be discussing the equipment we will be using for our filming. 

Our min piece of equipment that will be needed at all times is the Canon 700D camera that shoots very high quality video s well as being able to take very high resolution images. The camera will be used in a variety of different ways, be used in many different shot angles as well as capturing our entire music video. An important piece of equipment to go with the camera is the tripod as for the music video to get it to look as professional and well shot as possible, the camera needs to be stable with no shaking present and that is something the tripod can do very well. We are trying to get hold of a dolly as well which are a set of wheels to go underneath the tripod however if there isn't one available that i fully working, we will have to do without it. The dolly can help us do tracking shots which would be very helpful in our music video as part of it involves us as a group walking with the camera tracking us and the dolly would be able to capture the footage with no shaking or resistance.

The SD memory card is somewhat a very important piece of equipment as it stores all of the footage we take with the camera and then is transferable to the computer for editing. Without this card, there wouldn't be any footage to upload making the project significantly more difficult.

Items such as the computer are very important pieces of equipment that are not really considered front line' however it is extremely important as all of the editing, trimming and effects are used on the footage to create our final production to upload onto our blogs. Adobe Premiere Pro is the editing software we use as it is very good for what is needed in this project with multiple effects to choose from ,the ability to trim and merge videos and much more to create a top quality production.

Other forms of equipment include the lighting and umbrella which will be used to enhance our production, particularly inside however much of the filming will take place outside where natural lighting will be good enough for shooting. Inside shots such as the performance video.


Overall we do use a wide variety of equipment to make our production reach its full potential. Equipment such as the high quality camera and the editing software are the main two pieces which will benefit us the most with making our music video.



Prop and Costume List (Created By Connor Crosby)

Prop and Costume List

Summary of Star (Created By Connor Crosby)

Summary of Star

Location Recce (Created By Daniel Bruce)

Location Recce (Created by Daniel Bruce)


Shot List (Created By Daniel Bruce)

Shot List (Created By Daniel Bruce)

Risk Assessment (Created By James Ellis)

Risk Assessment (Created By James Ellis)

Langley hill, as addressed in the name, is positioned on a large hill as a result suitable footwear would be needed at all time to reduce the chance of any slips or injuries occurring whilst on set which could potentially harm our chances of creating a production which is to our full capability.

Kings Langley Common includes a woods which is a vital part to our production. There are many risks which can occur whilst in a woods, most notably, the large amount of tree debris situated around the environment so carefulness is vital to the production. To reduce the chance or any injuries we will produce a clear path, which will be easily used by the actors without the risk of injury.

One risk that we will be encountering is that of pedestrians and others in the local community. To ensue that everyone involve stays safe and can conduct the production successfully, we shall be filming when there are no pedestrians present. There may be others in the background that may appear to be people in the local community, but we can ensure that these are highly trained actors which are positioned for nothing but effect in the production.

Another risk for our production the instruments which could pose some distress with the weight of them, if carried for a long period of time at once. It is important that the instruments are used correctly and appropriately to ensure that there is no damage done to both the instruments but more importantly the individuals in the production.

As we are using amps for the production, there will be some wire hazards that could cause some concern. It is possible for anyone in the production process to trip over these wires and cause harm. Furthermore, to eliminate this hazard, we will be taping down the wires to the floor, with luminous tape therefore, they will be very clearly visible.

Storyboard (Created By James Ellis)

Storyboard (Created By James Ellis)
 

Tuesday, 30 December 2014

Analysis Of Magazine Posters and Digipaks

Analysis Of Magazine Posters and Digipaks

Skype Call With Ian Haughton (Handsome Design)

Skype Call With Ian Haughton (Handsome Design)

During one of our media lessons our media class had a Video Skype call with Ian Haughton of Handsome Design. We spoke about quite a variety of aspects related to the Design and Marketing of Digipaks and Magazine Posters and of course the process through each of these go through when being made public. Our class devised a list questions which we were actually able to personally ask Ian, who was an expert at what he does, and this can be seen in the embedded YouTube video.


This interview has given myself and my group essentially what is needed in terms of the Digipak and Magazine Poster and also the do's and don'ts which I found very helpful and also influential in the Ancillary Task of actually creating our groups Digipak and Magazine Posters. We were able to grasp all the key components Ian was telling us and he also gave his own opinion on certain subjects and conveyed particular past experiences he had encountered which I feel helped everyone, as well as my group, because it showed me that he knew what he was talking about and therefore everything he was saying was very useful information which we should be taking note of and channeling into our own Digipaks and Magazine Posters which I feel our group did.

Photographs Of Filming And Editing

Photographs Of Filming And Editing

Before actually filming the required scenes in the Drama Studio, at our school, we had to set the scene and make sure everything was right for filming and set up how we pictured it - this including the backdrop, lighting and placement of instruments. We all had a group input on what lights we thought should be used but ultimately the decision came to the Daniel, our Director, and he made all the right decisions to ensure our set was very aesthetically pleasing and borderline professional.

Since our AS work, and even our GCSE work, the editing skills within our group has drastically increased - the productions we have recently created and certain scenes we have filmed and edited tell us this. We have chosen to stay with the same editing software, Adobe Premiere Pro CS6, throughout the course of this but ultimately our knowledge of the software we are using and what we can achieve through it has enhanced massively. We took full advantage of what we have learned in other lessons and have been using our new found knowledge within the editing process of our music video - markers is probably the main one we have been using as we find it is very helpful to keep track of certain points which may otherwise be very hard to find if you ever wanted to edit that particular piece again.






Images of Ancillary Task Editing

Images of Ancillary Task Editing

The images below have been taken during the Editing process of our Ancillary Task in terms of creating our Digipak and Magazine Poster - we are using Adobe Photoshop CS6 and we are aiming to highlight the complexity of our editing skills. After researching real Digipaks and Magazine Posters we tried our best to include all the common features that were included in the certain ones we looked at so that we could make it as authentic as possible and make it look like it was made by professionals within the music industry. We included our own record label 'BCES Productions', which we originally created to serve as the Production Company for our AS Thriller Opening Sequence, and we have also included a QR Code which enables consumers of the poster to scan the code and be directed straight to Daniel's Blog which will then allow them to understand the band in thorough detail while also following the process of our A2 Music Video.















Reply From Record Company

Reply From Record Company

We didn't get a reply from the Record Company we contacted in relation to using the 1975's songs 'Girls', 'Sex' and 'Menswear'. 

Monday, 29 December 2014

Conventions Of The Digipak Form

Conventions Of The Digipak Form

To make my Digipak realistic and professional, I have been looking at some existing Digipak's for the conventions that are included in Digipak's, for example, the main image, band name, track lists. All majority of Digipak's are created for special or limited edition disks and DVDs of gigs/concerts. A Digipak included a CD and a DVD. 

All Digipak includes the following information:

• Visual image/key to the production
• Band/artist name - allow audience to identify band/artist
• Album title - on main cover and along the spine
• Track list/What's on the DVD
• Basic background information of the band/artist
• Occasional review e.g. NME


Front Panel - Main image, usually of the artist/band or something that iconic/symbolic of them. Name of artist and album (in big font, to catch audiences' attention).

Spine(s) - Names of artist/band and album, institution.

Back Panel - Usually track list, and printed on in contrasting colours so its readable.

Fold in Panel - Often a image of artist/band, however if it's a long fold out, the fold in panel would be a continued from the Front and Back Panel.

Inside Panels - CD, maybe even a booklet. Often images of artist/band or something symbolic/iconic printed inside, behind the discs. There may also be information about the album and quotes by the artist/band written inside the Digipak.

Colour Scheme - Usually reflects the mood of album or the genre of the tracks/songs on the disc.